EE894 二氧化碳傳感器
- 公司名稱 上海蒸鑫電子科技有限公司
- 品牌 E+E/奧地利
- 型號 EE894
- 產地
- 廠商性質 代理商
- 更新時間 2024/10/17 17:23:00
- 訪問次數 1823
聯系方式：劉劍13764316958 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
英國TT、奧地利E+E、優思泰克USTK、巴塞爾BAL SEAL、韓國可天士KODENSHI、瑞士TE品牌中國地區合作伙伴
| 應用領域 | 建材/家具,綜合 |
|---|
The EE894 module is ideal for demand controlled ventilation and building automation. It incorporates the E+E dual wavelength NDIR CO2 sensor,which compensates for ageing effects, is highly insensitive to pollution and offers outstanding long term stability. Beside CO2, the module measures also relative humidity (RH), temperature (T) and ambient pressure (p).
A multiple point CO2 and T factory adjustment procedure leads to excellent CO2 measurement accuracy over the entire T working range. The pressure compensation minimizes the impact of altitude and ambient pressure variations onto the CO2 measured data.
The measured data, with a range of up to 1% CO2, is available on the I2C or the E2 digital interface. The EE894 is available in two sizes and with electrical connection via contact pins and pads, which facilitate the design-in.
An optional kit for the E2 interface facilitates easy configuration of the module and the adjustment of the CO2, RH, T and pmeasurement. The CO2 measurement interval can be set according to the application requirements; by this the average current consumption can be reduced to 420 μA, ideal for battery-operated devices.
Typical Applications：
Demand controlled ventilation
Building automation
Data loggers and hand helds
Wireless transmitters
Key features：
Autocalibration
Outstanding long-term stability
Temperature and pressure compensated
Low power consumption
Small size
EE894二氧化碳傳感器是按需控制通風和樓宇自動化的理想選擇。它采用了E+E雙波長NDIR CO2傳感器，可補償老化效應，對污染高度不敏感，并提供出色的長期穩定性。除了二氧化碳，該模塊還測量相對濕度（RH）、溫度（T）和環境壓力（p）。
多點CO2和T工廠調整程序可在整個T工作范圍內實現出色的CO2測量精度。壓力補償將海拔和環境壓力變化對CO2測量數據的影響降至較低。
可在I2C或E2數字接口上獲得測量數據，其范圍高達1%CO2。EE894有兩種尺寸可供選擇，并通過觸針和焊盤進行電氣連接，這有助于在中進行設計。
E2接口的可選套件有助于輕松配置模塊和調整CO2、RH、T和P測量。CO2測量間隔可根據應用要求設置；這樣，平均電流消耗可以降低到420μA，非常適合電池驅動設備。
典型應用：
按需控制通風
樓宇自動化
數據記錄器和手持設備
無線發射機
EE894二氧化碳傳感器主要特點：
自動校準
專業的長期穩定性
溫度和壓力補償
低功耗
小尺寸
采購中心
化工儀器網