特點
·頻率范圍1Hz~50MHz
·上升/下降時間：6ns~500ms變量
·幅度范圍：0.2V~10V
·直流偏移量：-2.5V~+2.5V
·手動設備及外部觸發、門、脈沖成型
·脈沖模式：?jiǎn)?雙
技術指標
·Technical specifications
·Time parmeters
·Pulse repetition time:20ns to 1s1Hz to 50MHz
·Pulse delay:10ns to 100ms
·Pulse duration:10ns to 100ms
·Duty factor:0.00000001 to 0.99999999high duty factors require inverted mode
·Main output pulse characteristics
·Pulse amplitude:0.2V to 10V at Z=50Ω
·Source impedance
·10V range:Current source
·5Vlower ranges:50Ω
·Polarity
·PM5712:+only.Pulses within-5Vto +10V
·possible,using DC offsetnormal or inverted
·Transition times
·Corresponding to 10 to 90% of pulse ampitude,at amplitudes of ≥5Vand Z=50Ω
·continuous control of rese-and fall-times
·within each of 6 ranges.
·PM5712:4ns fixed
·DCoffset at Z=50Ω
·PM5712:-5V to +2V
·Max outout voltage:Pulse amplitudedc offset max.+10V
·Waveform aberrations:<±5% of set amplitude
·Pulse modes:
·Single pulsedelayable
·Double pulse
·T/2,50%duty cycle,50±20%dutycycle in 20ns100ns repetition range
·Logic mode:Normal or inverted
·Output protection:Short or open circuit safe
·Auxiliary pulse output characteristics
·Pulse amplitude:+2.5V into 50Ω or +4.5V open circuit,TTL-compatible
·Source impedance:50Ω
·Pulse waveforms:Single pulse in singleT/2 pulse modes.Double pulse in double pulse mode.
·Pulse advance:Approx.12ns ahead of main single or double pulses
·Oputut protection:Short or open circuit safe
·Internal clock outputsync.output
·Function:Pre-trigger output,mian output pulse is delayable with respect to sync. output
·Amplitude:+1.5V at Z=50,+3V open circuit
·Source impedance:50Ω
·Pulse advance:Approx 40ns ahead of main single pulse with pulse delay set to 10ns
·Output rotection:Short or open circuit safe
·External operating modes
·TRIGG:Each input pulse,generates an output pulse
·GATE:Synchronous gating.Input signal disables output pulses
·DURATION:Pulse mode T/2gives output pulses with same durationretetition rate as external input signal,other waveform parameters are set via the generator
·MANUAL:Single shot push button simulate external signal for triggering,gatingduration
·External input
·Function:For xeternal trigger,gateduration
·Range:DC to 50MHz
·Coupling:DC
·Input impedance:Approx.220Ωat <1.5V,approx.800Ωat >1.5V
·Trigger level:≤+1V
·Trigger slope:Positive
·Pulse delay:Approx.50ns from input to main single pulse with delay set to 10ns
·Max.input voltage without damage:±12V
·General specifications
·Power requirements
·Line:100,115,200or 230V±15%
·Line frequency:50to 400Hz
·Power consumption:70VA
·Environmental conditions
·Temperature range
·Operating:0to 40℃
·Storage:-40℃to 70℃
·Safety:According to CE-regulation 73/23
·EN61010-1 CAT II,POllution Degree2
·EMC:Accordingto CE regulation 89/336:
/emission according to EN 550081-1,EN55022,Class BEN60555-2.Immunity according to EN 50082-1,inclusive IEC 80-2,-3,-4,-5.
·Mechanical specifications
·Size:210mmW×130mmH×275mmL8.3in W×5inH10.8inL
·Weight:4kg8.8lb
·Included with instrument:Manual,power cord
訂貨信息

Model Name	Product Description
PM 5715/11	Pulse Generator

Model Name	Accessory or Option Description
PM 5715	Service Manual
PM 9571/01	50Ω Feedthrough termination 3W
PM 9584/02	50Ω T-piece matched power-splitter
PM 9585/01	50ΩFeedthrough Termination,1W
PM 9588/01	50Ω BNC-BNC cable set 5＊0.2m,4＊0.4m,3＊0.6m,3＊2mregular cables