典型應(yīng)用
詳細的資料
系統(tǒng)組成技術(shù)參數(shù)

ComScan 160 II set up for wing inspection.  In order to detect troublesome corrosion in the past, airplanes were periodically disassembled which took thousands of man hours.  With ComScan, the critical regions can be scanned compley without dismantling the airplane

ComScan 160 II has been designed for the inspection of light weight materials such as aluminum, honeycombs, aerospace composite materials, carbon fiber structures, etc.  Unlike conventional X-ray techniques which require both sides of the inspection sample for positioning of the X-ray sourceimaging device, ComScan only requires access to one side of the inspection sample.  This unique feature allows surface measurement of large, thick, bulky objects to be inspected which might otherwise not be possible with conventional X-ray techniques.

The system gives an accurate determination of defect sizedepth.   It is not even necessary for X-rays to penetrate the total inspection sample depth since ComScan utilizes back-scattered radiation.  The system is particularly well suited for the inspection of impact damage, corrosiondefective core conditions.　

• scan parameters:
  -1 pencil beam: 0.4 mm x 0.4 mm cross-Section
  -22 detector elements: BGO 1 mm x 2 mm x 60 mm coupled to photomultiplier tubes
  - Scan area: 50 mm x 100 mm
  - Scan time, adfjustable between 75 sec375 sec in 5 steps
  - Depth range: 
  10 mm with 10 mm dead spacestandard
  50 mm with 10 mm dead spaceoptional
  5 mm with 5 mm dead spaceoptional
  - 22 slices: 0-9 mm slice thickness on arerage,partly overlapping for 10 mm depth range
  - 250 positions along axis of rotating aperturephi-axis
  - 500 positions perpendicular to rotating apertureX-axis
  - Accuracy of detected data: 16 bits
  - Maximum resolution: 0.4 x 0.4 x 0.4 mm333for 10 mm depth range
  - image matrix: 250 x 500 pixel x 8 bits
  - Image display:1or2 slices at a time on a 512x512 pixel video screen
  - Penertration power: 
  50 mm in plastics, composites
  20 mm in aluminum
  5 mm in steel
• mains supply:
  - Nominal voltage 220V 50/60 Hz, single phase
  - Mains fuse 35 A
• environmental conditions:
  - duty cycle * up to +40°C+105°Fambient temperature in nonconvective air
  - operetion: Temperature + 10°C+50°F up to +40°C105°F, Relative humidity 70% at 40°C +105°F
  - Storage: Temperature -20°C-5°F up to +50°C （120°F, Relative humidity 95% at +40°C +105°F
• weight/dimensionsmain components:
  - ComScan control rack 600 mm 23.6" wide.800 mm 31.5" deep. 1370 mm 154" high.weight approx 100 daN kg
  - ComScan head 600 mm 23.6" long plus 400 mm 15.7" for cable connections. 165 mm 6.5" deep, 370 ,mm 14.6" high, weight approx 45 daN kg incl. x-ray tube
  - x-ray control unit incl. housing 520 mm 20.5"wide, 302 mm11.9" deep, 180 mm 7" high,weight approx 15 daN kg
  - X-ray power supply 720 mm 28.3" long.390 mm 15.4" deep, 335 mm 13.2" high.weight approx 61 daN kg
  - X-ray H.V.-generator 970 mm 38.2" long,440 mm 17.3" wide, 485 mm 19.1" high,weight approx 200 daN kg
• optionsavailable on request:
  - Additional serial interface ports rs 232 C
  - Focussing detector apertures for depth ranges other than standard
  - Hardcopy printer for documentation of ComScan images
  - operation desk for installation of x-ray control unitplacoment of controlimages monitors， key board hard copy printer etc.