海綿定載沖擊/往復沖擊疲勞試驗機

（觸摸屏-自動調節）

產品型號：PMPL-2000A

制造標準：

（GB/T 18941 ISO 3385）《 軟質泡沫聚合材料.用定載沖擊法測定疲勞》

            ( QB/T QBT 2819-2006) 《軟質泡沫材料長期疲勞性能的測定》

QCT56-93《汽車座椅襯墊材料性能試驗方法》

日本汽車工業標準JASOB408-84

一、主要適用范圍及功能：

      海綿定載沖擊/往復沖擊疲勞試驗機主要用于泡沫聚合材料的往復沖擊壓縮疲勞試驗，測定試樣的厚度減少值和硬度降低值（殘余變形率），并由此可以了解材料的動態疲勞特性。

本儀器控制系統采用德國西門子PLC，通過7寸彩色觸摸屏進行參數設置和操作，可以根據實驗需要設定沖擊負荷及實驗次數和沖擊厚度，本儀器的zui大特點是：試樣隨著沖擊時間和次數的增加，沖擊載荷小于設定沖擊負荷時能夠自動調節試樣托盤的高度，使沖擊負荷始終保持在設定的沖擊負荷范圍內，當試驗完成后，具有報警提示！

本儀器具有使用操作方便，性能可靠，測量精度高，是的海綿疲勞沖擊試驗機。

二、海綿定載沖擊/往復沖擊疲勞試驗機主要技術參數：

    1、zui大加載能力：0-2000N.

  2、往復壓縮頻率：0-100次/分，（標準要求：70±5次/分）

3、zui大壓縮次數：可設定

  3、往復壓縮行程：zui大100mm.

  4、壓盤直徑：φ250 mm±1mm.下邊緣圓角：R25mm±1mm

    5、試樣支撐臺：正方形邊長：450mm 厚度：10mm,孔徑：6mm 孔距：20mm

    6、試樣尺寸：邊長-380mm±20mm, 厚度-50mm±2mm,形狀-長方形

    7、力值顯示：實時動態顯示峰值

8、實驗次數：動態液晶顯示，到達設定的數值后自動停止

9、實驗完成：聲鳴報警

三、海綿定載沖擊/往復沖擊疲勞試驗機主要配置

   1、測試主機一臺

   2、高精度傳感器一支

   3、主機測試夾具一套

   4、調速電機系統一套

   5、德國西門子PLC 一套

   6、7寸觸摸屏  一套

   7、高度自動調節裝置 一套

   6、產品說明書一份

   7、產品合格證一份

   8、產品裝箱單一份

 四、海綿定載沖擊/往復沖擊疲勞試驗機型號規格：

  PMPL-2000A--海綿/泡沫疲勞壓陷試驗機-觸摸屏-自動型

  PMPL-2000B--海綿/泡沫疲勞壓陷試驗機-液晶顯示-手動型

   Sponge fixed load impact / reciprocating impact fatigue testing machine

(touch screen automatic adjustment)

海綿定載沖擊/往復沖擊疲勞試驗機

（觸摸屏-自動調節）

Product type: PMPL-2000A

Manufacturing standards:

(GB/T 18941 ISO 3385) "soft foam polymeric material. With fixed load impact method for the determination of fatigue"

(QB/T QBT 2819-2006) "determination of soft foam material long-term fatigue properties"

Test method for performance of auto seat cushion material QCT56-93 ""

The Japanese auto industry standard JASOB408-84

產品型號：PMPL-2000A

制造標準：

（GB/T 18941 ISO 3385）《 軟質泡沫聚合材料.用定載沖擊法測定疲勞》

            ( QB/T QBT 2819-2006) 《軟質泡沫材料長期疲勞性能的測定》

QCT56-93《汽車座椅襯墊材料性能試驗方法》

日本汽車工業標準JASOB408-84

One, the main scope and function:

Sponge fixed load impact / reciprocating impact fatigue testing machine is mainly used for compression fatigue test reciprocating impact foam polymeric material, determination of the sample thickness reduction and the lower hardness values (residual deformation rate), and then we can know the dynamic fatigue properties of materials..

The instrument control system used in Germany Siemens PLC, parameter setting and operation by 7 inch color touch screen, can according to the number of impact load and test and impact thickness hypothesis test, the biggest feature of this instrument is: with the increasing impact time and the number of samples, which can automatically adjust the height of a specimen tray impact load is less than the set of impact load when the impact load, impact load is maintained in the set range, when the test is completed, with alarm!

The instrument has the advantages of convenient operation, reliable performance, high measuring precision, sponge fatigue impact test machine is the most leading.

Two, sponge fixed load impact / reciprocating impact fatigue testing machine main technical parameters:

1, the maximum loading capacity: 0-2000N

2, reciprocating frequency: 0-100 times / min, (standard: 70 ± 5 beats / min)

3, the maximum compression times: can be set

3, reciprocating compression stroke: the maximum 100mm

4, plate diameter: diameter 250 mm ± 1mm. edge fillet: R25mm ± 1mm

5, the sample support table: square length: 450mm: 10mm: 6mm thickness, aperture hole distance: 20mm

6, the sample size: length -380mm ± 20mm, -50mm ± 2mm thickness, shape and rectangle

7, the force value display: real time dynamic display peak

8, the number of experiments: dynamic display, automatic stop reaches the set value

9, the experiment: the sound alarming

Three, sponge fixed load impact / reciprocating impact fatigue testing machine configuration

1, a test mainframe

2, a high precision sensor

3, a host test fixture

4, motor speed control system

5, Germany Siemens PLC set

6, a set of 7 Inch Touch Screen

Four, sponge fixed load impact / reciprocating impact fatigue testing machine specifications:

PMPL-2000A-- sponge / foam fatigue indentation test machine touch screen - automatic type

PMPL-2000B-- sponge / foam fatigue indentation test machine - liquid crystal display manual type