113-48DIELECTRIC INK絕緣油墨
說明：113-48是一種極為靈活、電絕緣的油墨、涂料和粘合劑。
通過沖壓、絲網印刷、浸漬和注射器分配應用。
DESCRIPTION: 113-48 is an extremely flexible, electrically insulating ink, coating and adhesive suitable for

113-48DIELECTRIC INK絕緣油墨

說明：113-48是一種極為靈活、電絕緣的油墨、涂料和粘合劑。

通過沖壓、絲網印刷、浸漬和注射器分配應用。本產品具有良好的附著力

到卡普頓，聚酯薄膜，玻璃，和其他各種表面。與傳統(tǒng)絕緣材料不同，這種產品

非?？箯澢驼郯?。113-48的一些應用包括但不限于絕緣

聚酰亞胺柔性電路、聚合物厚膜電路和薄膜開關。113-48是

104-38歲。

典型固化特性：

稠稠液體

抗皺性佳

體積電阻率（Ω-cm）1 x 1011

介電強度（伏特/密耳）525

硬度（肖氏硬度D）55

抗拉強度（psi）6500

抗撕裂性（磅/英寸）>300

水汽透過率低

建議的處理和固化：113-48已準備好供應使用。進一步變薄可能是

通過添加少量CMI稀釋劑102-03和/或醋酸丁酯來完成。性能

大多數應用是在使用200-300瓦/英寸汞蒸氣燈進行固化后，再進行

在150°C到180°C下幾分鐘。典型的固化時間從幾秒到一分鐘不等，具體取決于

可用能量。通過使用200-300固化劑在多種基材上獲得良好的性能

瓦特/英寸汞蒸氣燈，隨后在50°C至180°C的溫度范圍內進行后固化。終用戶

建議通過實驗確定適合個人應用的溫度和時間。

儲存：保存在密封的不透明容器中，在25℃下保存6個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免長時間

接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

113-48DIELECTRIC INK絕緣油墨

DESCRIPTION: 113-48 is an extremely flexible, electrically insulating ink, coating and adhesive suitable for
application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion
to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional insulating materials, this product is
very resistant to flexing and creasing. Some applications for 113-48 include, but are not limited to, insulating
polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 113-48 is a crosslinking version of
104-38.
TYPICAL CURED PROPERTIES:
 Consistency Thick Liquid
Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 1 x 1011
Dielectric Strength (volts/ mil) 525
 Hardness (Shore D) 55
Tensile Strength (psi) 6500
Tear Resistance (lbs/in) > 300
Moisture Vapor Transmission Low
SUGGESTED HANDLING & CURING: 113-48 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of CMI Thinner # 102-03 and/or butyl cellosolve acetate. Best properties for
most applications result when cured using a 200-300 watt/inch mercury vapor lamp, followed by a post cure for
several minutes at 150°C to 180°C.Typical cure time varies from a few seconds to a minute, depending on the
amount of energy available. Good properties are obtained on a variety of substrates by curing using a 200-300
watt/inch mercury vapor lamp, followed by a post cure for at temperatures ranging from 50°C to 180°C. End user is
advised to experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf Life: 6 months at 25°C, when kept in a sealed opaque container.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.