應用領域 | 綜合 |
---|
VL-3704;VL-3705;PD-9310B;PD-9310B-N
參考價 | 面議 |
更新時間:2023-06-29 12:41:14瀏覽次數:630
聯系我們時請說明是化工儀器網上看到的信息,謝謝!
Gigahertz-Optik傳感器P-9710-1主要型號MSC15,BTS256-E,BTS256-EF,HCT-9610.X1-1;X1-3; VL-3701;VL-3702;
VL-3704;VL-3705;PD-9310B;PD-9310B-N
歐洲進口品牌一級代理:德國多個優勢品牌
ODU Burkert microsonic HBM LINOS 等【優勢品牌歡迎詢價】
gigahertz-optik
gigahertz-optik
Gigahertz-Optik GmbH
深圳市扎克貿易有限公司有限品牌長期致力于Gigahertz-Optik激光測距儀Gigahertz-Optik照度計Gigahertz-Optik輻射儀Gigahertz-Optik光譜儀Gigahertz-Optik傳感器Gigahertz-Optik測角儀Gigahertz-Optik功率計Gigahertz-Optik放大器Gigahertz-Optik探測儀Gigahertz-Optik電源模塊Gigahertz-Optik傳感器
主要型號MSC15,BTS256-E,BTS256-EF,HCT-9610.X1-1;X1-3; VL-3701;VL-3702;
VL-3704;VL-3705;PD-9310B;PD-9310B-N
Gigahertz-Optik測量范圍探測器頭
驗光.儀P-9710-1,P-9710-2和P-9710-4可與Gigahertz-Optik GmbH的所有單通道檢測頭一起使用。探測器的技術數據顯示其在A / W,A / 1x等中的典型靈敏度 這些信息可用于使用下述步驟與光度計P-9710-1,P-9710-2和P-9710-4一起計算測量頭的測量范圍。
由檢測器和光度計Gigahertz-Optik P-9710-1, Gigahertz-Optik P-9710-2或Gigahertz-Optik P-9710-4組成的光測量裝置的測量范圍來自zui小值。和zui大。驗光.儀的當前測量范圍和探測器頭的靈敏度。本數據表中可以找到光學眼鏡當前測量范圍的詳細信息。測量頭的典型靈敏度在相應的數據表中列出Gigahertz-Optik
噪聲等效測量信號
視光儀偏移信號/檢測器的靈敏度
Gigahertz-Optik GmbH
Gigahertz-Optik測量范圍探測器頭
驗光.儀P-9710-1,P-9710-2和P-9710-4可與Gigahertz-Optik GmbH的所有單通道檢測頭一起使用。探測器的技術數據顯示其在A / W,A / 1x等中的典型靈敏度 這些信息可用于使用下述步驟與光度計P-9710-1,P-9710-2和P-9710-4一起計算測量頭的測量范圍。
由檢測器和光度計Gigahertz-Optik P-9710-1, Gigahertz-Optik P-9710-2或Gigahertz-Optik P-9710-4組成的光測量裝置的測量范圍來自zui小值。和zui大。驗光.儀的當前測量范圍和探測器頭的靈敏度。本數據表中可以找到光學眼鏡當前測量范圍的詳細信息。測量頭的典型靈敏度在相應的數據表中列出Gigahertz-Optik
噪聲等效測量信號
視光儀偏移信號/檢測器的靈敏度
示例:類型。靈敏度檢測器0.33 nW /cm2,
P-9710-1 / P-9710-2 / P-9710-4偏置信號0.1 pA
0.1 pA / 3 nA /(mW /cm)= 33 nW /cm2
zui小的可測輻照度
噪聲等效信號信噪比因子
例如:33 nW /cm 50 = 16.5μW/cm
(假定系數為50)
為了支持其多功能應用,該設備提供十八種不同的測量模式,可通過用戶友好的菜單進行選擇。
CW 在所選積分時間的測量間隔內進行連續測量。
CWzui大值 顯示當前的CW測量值和達到的zui大CW值。
CWzui低 顯示當前的CW測量值和達到的zui小CW值。
zui高峰值 用調制輻射顯示當前CW測量值和zui低峰值。測量間隔100μs。
峰值zui低 用調制輻射顯示當前CW測量值和zui低峰值。測量間隔100μs。
高峰到高峰 用調制輻射顯示當前CW測量值和峰峰值峰值。測量間隔100μs。
我 顯示強度或輻射。顯示的測量值是根據光源和探測器之間的測量距離計算的。測量距離在菜單項目SETUP中輸入。
我有效(SC) 根據Schmidt-Clausen的形狀因子法測量閃光的有效光強度。時間常數C在菜單項目SETUP中選擇。
我有效地(BR) 根據Blondel-Rey的形狀因子法測量閃光的有效光強度。閃光長度在菜單項目SETUP中輸入
脈沖能量 測量短光脈沖的脈沖能量??烧{整的測量時間。根據光檢測器的輻射測量或光度測量顯示脈沖能量。
相對(%) 測量值是與參考值的比率。以百分比顯示。
相對(日志) 測量值顯示為以dB或dBm為單位的參考衰減。
相對(事實) 測量值是與參考值的比率,并顯示為一個因子。
持有 啟用或禁用CW測量。
CW等級檢查 CW測量值與以前定義的zui小和zui大極限值的比較。顯示超出或低于極限值。配合可選的P-9710-Z03繼電器卡。
劑量(C) 在設定積分時間的測量時間間隔內集成測量值。根據光檢測器的輻射測量或光度測量顯示能量。
記錄器(x) 存儲高達12288個人讀物。測量值根據預設時鐘頻率記錄。
遙控R S232 RS232接口允許通過PC進行操作。
The P-9710-1 optometer is a high-quality device designed by Gigahertz-Optik for mobi.le use. Its signal amplifier provides a wide dynamic range for the detectors’ signal currents ranging up to 2 mA. The noise-equivalent current signal is as low as 0.1 pA. The device has eight gain ranges that can be manually or automatically selected for adjustment to match the signal levels.
Variable integration time
One of the characteristic properties of the P-9710-1 optometer is the short integration time of the input amplifier that only ranges around 100 µs. This enables reduction of signal noises through multiple measurements with averaging. The 100 µs integration time also makes it possible to perform many other measurement functions:
Adjustable integration times in CW measurement mode
CW measurement with noise proportion (peak-to-peak)
Peak value measurement
Pulse energy measurements of short light pulses
Dose measurement
Fast data logger for up to 12000 measurement values
Photometer, radiometer, UV-meter, laser-intensity-meter
For use as optometer the P-9710-1 can be combined with all offered detector heads intended for photometric and radiometric measurements. The plugged detector head determines the photometric or radiometric measuring size as well as the spectral range of the measurement. Gigahertz-Optik offers a wide range of detector heads for various measuring tasks. The optometers’ signal input amplifiers offer a very wide dynamic range, in order to adjust the devices to detectors with various sensitivities and optical radiation intensities. The calibration data of the detector heads are saved in the calibration data plug of the detector heads.
Simple and safe detector exchange
Upon attachment of a detector head with a calibration data plug onto the P-9710-1 optometer, its calibration data as well as the device settings are automatically applied. This ensures that improper operation that might result from exchange of measurement heads is basically ruled out.
Remote operation
The P-9710-1 optometer can be connected to a PC via its RS232 interface.
Light measurements and light analysis
The P-9710-1 optometer has eighteen different measurement modes that can easily be selected using a user-friendly menu hence enabling its multifunctional application.
Unlike the P-9710-1, the P-9710-2 optometer has a 20 ms standard time constant in all eight gain ranges. Thus light pulses shorter than 1 ns are stretched to 20 ms. The pulse energy of the stretched pulse can then be measured precisely with the 100 µs sample rate of the optometer.
Similar to the optometer P-9710-2, the P-9710-4 also has a 20ms standard time constant in all eight gain levels. Besides the manual start of via keyboard, the dose measurement can also be started remotely via the trigger input.
Gigahertz-Optik P-9710-1 儀表,電源(D,USA或GB),說明書
Gigahertz-Optik S-P9710 "P9710測量儀器和變體的應用軟件。
"
Gigahertz-Optik P-9710-2 儀表,電源(D,USA或GB),說明書
Gigahertz-Optik P-9710-4 "P9710測量儀器和變體的應用軟件。
"
Gigahertz-Optik S-SDK-P9710 軟件開發工具包,用于軟件實現P9710或自己軟件中的變體
Gigahertz-Optik P-9710Z-01 "RS232適配器電纜
"
Gigahertz-Optik P-9710Z-02 "帶RS232接口的繼電器卡
"
Gigahertz-Optik P-9710Z-04 "用于組合RS232和模擬輸出插座的插頭套件
"
Gigahertz-Optik P-9710Z-1S / 2B 帶BNC(-1)型插頭的探測器適配電纜
Gigahertz-Optik BHO-01 "測量設備和配件的硬殼
"
Gigahertz-Optik BHO-02 "測量設備和配件的硬殼
"
Gigahertz-Optik傳感器P-9710-1銷售單
9002821093 HKSV_0007837
5522684893 HKSV_000863
Gigahertz-Optik P-9710-1
Gigahertz-Optik S-P9710
Gigahertz-Optik P-9710-2
Gigahertz-Optik P-9710-4
Gigahertz-Optik S-SDK-P9710
Gigahertz-Optik P-9710Z-01
Gigahertz-Optik P-9710Z-02
Gigahertz-Optik P-9710Z-04
Gigahertz-Optik P-9710Z-1S / 2B
Gigahertz-Optik BHO-01
Gigahertz-Optik BHO-02
Gigahertz-Optik MSC15
Gigahertz-Optik BTS256-E
Gigahertz-Optik HCT-9610
Gigahertz-Optik X1-1
Gigahertz-Optik X1-3
Gigahertz-Optik VL-3701
Gigahertz-Optik VL-3702
Gigahertz-Optik VL-3704
Gigahertz-Optik VL-3705
Gigahertz-Optik PD-9310B
Gigahertz-Optik PD-9310B-N
Gigahertz-Optik LDM-9810
Gigahertz-Optik LDM-9901
Gigahertz-Optik PD-9310與SRT-M37-L
Gigahertz-Optik ISD-5-VL
Gigahertz-Optik ISD-10-VL
Gigahertz-Optik ISD-15P-VL
Gigahertz-Optik MD-37-VL-SU100
Gigahertz-Optik MD-37 VLS-SU100
Gigahertz-Optik PD-9304
Gigahertz-Optik RW-3701
Gigahertz-Optik RW 3702
Gigahertz-Optik RW 3703
Gigahertz-Optik RW 3704
Gigahertz-Optik RW 3705
Gigahertz-Optik RCH-102
Gigahertz-Optik ISD-5-VISNIR
Gigahertz-Optik ISD-0.8-SILP
Gigahertz-Optik ISD -5-硅
Gigahertz-Optik ISD-5P硅
Gigahertz-Optik ISD-10硅
Gigahertz-Optik ISD-15硅
Gigahertz-Optik ISD-30
Gigahertz-Optik PD-11系列
Gigahertz-Optik PS-3701
Gigahertz-Optik PS-3702
Gigahertz-Optik PS-3703
Gigahertz-Optik VL-1101 + UMPA-0.5-11-RD測量頭