人B-淋巴細胞趨化因子1試劑盒  檢測范圍：96T

2pg/ml-80pg/ml

使用目的：

人B-淋巴細胞趨化因子1試劑盒 用于測定人血清、血漿及相關液體樣本中B-淋巴細胞趨化因子1(BLC-1/CXCL13)含量。

實驗原理

本試劑盒應用雙抗體夾心法測定標本中人BLC-1/CXCL13水平。用純化的人BLC-1/CXCL13抗體包被微孔板，制成固相抗體，往包被單抗的微孔中依次加入BLC-1/CXCL13，再與HRP標記的BLC-1/CXCL13抗體結合，形成抗體-抗原-酶標抗體復合物，經過*洗滌后加底物TMB顯色。TMB在HRP酶的催化下轉化成藍色，并在酸的作用下轉化成最終的黃色。顏色的深淺和樣品中的BLC-1/CXCL13呈正相關。用酶標儀在450nm波長下測定吸光度（OD值），通過標準曲線計算樣品中人BLC-1/CXCL13濃度。

試劑盒組成

標本要求 

1．標本采集后盡早進行提取，提取按相關文獻進行，提取后應盡快進行實驗。若不能馬上進行試驗，可將標本放于-20℃保存，但應避免反復凍融

2．不能檢測含NaN3的樣品，因NaN3抑制辣根過氧化物酶的（HRP）活性。

操作步驟

• 標準品的稀釋：本試劑盒提供原倍標準品一支，用戶可按照下列圖表在小試管中進行稀釋。

• 加樣：分別設空白孔（空白對照孔不加樣品及酶標試劑，其余各步操作相同）、標準孔、待測樣品孔。在酶標包被板上標準品準確加樣50μl，待測樣品孔中先加樣品稀釋液40μl，然后再加待測樣品10μl（樣品最終稀釋度為5倍）。加樣將樣品加于酶標板孔底部，盡量不觸及孔壁，輕輕晃動混勻。
• 溫育：用封板膜封板后置37℃溫育30分鐘。   
• 配液：將30倍濃縮洗滌液用蒸餾水30倍稀釋后備用
• 洗滌：小心揭掉封板膜，棄去液體，甩干，每孔加滿洗滌液，靜置30秒后棄去，如此重復5次，拍干。
• 加酶：每孔加入酶標試劑50μl，空白孔除外。
• 溫育：操作同3。
• 洗滌：操作同5。
• 顯色：每孔先加入顯色劑A50μl，再加入顯色劑B50μl，輕輕震蕩混勻，37℃避光顯色15分鐘.
• 終止：每孔加終止液50μl，終止反應（此時藍色立轉黃色）。
• 測定：以空白空調零，450nm波長依序測量各孔的吸光度（OD值）。 測定應在加終止液后15分鐘以內進行。

• Calculate

  Take the standard density as the horizontal, the OD value for the vertical ,draw the standard curve on graph paper, Find out the corresponding density according to the sample OD value by the Sample curve, multiplied by the dilution multiple, or calculate the straight line regression equation of the standard curve with the standard density and the OD value ,with the sample OD value in the equation, calculate the sample density, multiplied by the dilution factor, the result is the sample actual density.

  Important notes

• The kit takes out from the refrigeration environment should be balanced 15-30 minutes in the room temperature, ELISA plates coated if has not use up after opened, the plate should be stored in Sealed bag.
• washing buffer will Crystallization separation, it can be heated the water helps dissolve when dilute . Washing does not affect the result.
• add Sample with sampler Each step, And proofread its accuracy frequently, avoids the experimental error. add sample within 5 min, if the number of sample is much , recommend to use Volley .
• if the testing material content is excessively higher (The sample OD is bigger than the first standard well ),please dilute Sample (n-fold), Please diluente and multiplied by the dilution factor.（×n×5）.
• Closure plate membrane only limits the disposable use, to avoid cross-contamination.
• The substrate evade the light preservation.
• Please according to use instruction strictly, The test result determination must take the microtiter plate reader as a standard.
• All samples, washing buffer and each kind of reject should according to infective material process.
• Do not mix reagents with those from other lots.

• Storage and validity

  1．Storage：  2-8℃.

  2．validity： six months