| Input |
| Item | VoltageV | CurrentA |
| Input circuit type | Floatinginput |
| Resistive voltage divider | Shuntinput |
| Rated inputs（range rms） | 10/15/30/60/150/300/600V | Directinput
1/2/5/10/20/30A
External shunt input:
Approx.100 kΩ |
| Input impedance | Inputresistance
Approx. 2 MΩ
Input capacitance
Approx.15 pF | Directinput:
Approx.6 mΩ +approx.0.07 μH
External shunt input:
Approx:100kΩ |
| Frequency range | DCand 2 Hz to 500 Hz |
Instantaneous
maximum
allowable
input for 1s | Thepeak voltage is 2500V,
or the RMS value is 3
times the range, whichever
is less. | The peak current is 90A,orthe RMS value is 50A,whichever is less.
External input:The peak value is 20times the range or less. |
Continuousmaximum
allowable input | The peak voltageis 1400V,
or the RMS value is 2.5
times the range, whichever
is less. | Thepeak current is 60A,or the RMS value is 35A,whichever is less.
External input:Thepeak value is 10 times the range or less. |
Continuousmaximum
common mode voltage | 600 Vrms（whenthe protective cover for the output connector is used）CATII
400 Vrms（whenthe protective cover for the output connector is removed）CATII
|
Common mode
rejection
ratio at
600V rms between
input terminals
and case
（50/60 Hz
input） | Voltage input terminals shorted,current input terminals
opened:Better than -80 dB（±0.01% of rdg or less） |
Reference value:
200 KHz max
±（0.18×f）/（Range
rating）%
of rdg or less（Unit of
f:KHz） | Referencevalue:
200 KHz max
±（0.03 ×f）/（Range rating））% of rdg or less（Unit off:KHz） |
| Input terminals | Bindingposts | Large binding posts
External shuntinput:BNC |
| A/D converter | Simultaneousconversion of voltage and
current input
Resolution:16 bits
Maximum:conversion rate:104 KHz |
| Overloadinput detection | Alarm lamp lightsat approx.350% of the
input range（approx.700% of range when
crest factoris 6） |
| Range switching | Therange can be switched manually,automatically,or by
communication control foreach
element. |
Auto range
switching | Range up:When the measuredvalue exceeds
110% of the rated value.or when the
peak value exceeds 350%of the peak value.
Range down:When the measured value
becomes less than30% of the rated value. |
Measurement
mode
Switching | The mode can be setfor each element
and also for each voltage and current measurement circuit. |
| Display Functions |
Display:
Display contents: | 7-segment LED （light emittingdiode）
4 displays |
| DISPLAY | Displaycontents | Display resolution |
| A | V,A,W（eachelement） | V,A,W:50000
Wh,Ah:500000
Hz:199999 |
| B | V,A,W（eachelement） |
| C | V,A,W,VA,var,PF,deg,
Vpk（eachelement） |
| D | V,A,W,Apk,THD,VHz,AHz,Wh
,Ah（eachelement）,η（efficiency） |
Unit:
Display update rate:
Peak hold function:
PEAK:
ALL:
Response time: | m,k,M,V,A,W,VA,var,pk,Hz,h,deg,%
Select from 0.25 sec（FAST）,0.5 sec（MID） and 2.0 sec （SLOW）.
Selectable tohold item as follows
Vpk and Apk can be held at maximum value
Measurementvalue of V,A,W,VA,var,Vpk,Apk can be held at maximum value.
Maximum of twicethe display update rate（The time taken for the display to fall within is OFF andan abrupt change is made from 0 to 100% of the range, of from 100 to 0% of therange） |
QQ交談
