Agilent 86061C 光開關
租售86061C,維修86061C,86061C回購利用,86061C深圳市美佳特科技有限公司技術方案支持
主要特性與技術指標
溫度的穩定提高了性能
帶有易于使用的手動界面，顯示可視信號路徑
用于控制多個開關配置的多層軟件
可重復性開關，使用壽命超過1000萬次循環
GPIB和RS-232控制
兼容SCPI的命令
Switch Sizea 1×4
GENERAL SPECIFICATIONS
Temperature Range
Operating
Storage
+0°C to +55°C
–40°C to +70°C
Humidity
Operating
Storage
Maximum relative humidity 95% for temperatures up to 40°C (non-condensing)
Maximum relative humidity less than 90% at 65°C
Altitude Altitude up to 15,000 feet (4,572 meters).
EMI Compatibility Conducted and radiated emissions meet the requirements of CISPR Publication 11 and
EN 55011 Group 1, Class A.
Power Requirements 100/115/230/240 V (range 90 to 254 Vac),
50/60 Hz (range 47 to 63 Hz)
Power Consumption Up to 80 VA
Installation Category Category II per I.E.C. 1010
Pollution Degree Degree 2 per I.E.C. 664
Usage For indoor use.
Enclosure Protection IP 2 0, according to IEC 529
Insertion Lossa
Single-mode switches
Multi-mode switches
a. Insertion loss does not include connectors. Include an additional 0.5 dB (0.25 dB characteristic) for each
connector.
1.0 dB (0.7 dB)
0.8 dB (0.6 dB)
Insertion Loss Stabilityb
b. Drift of any channel relative to one assigned reference channel at ±3°C deviation of ambient temperature
over 7 day period.
±0.03 dB (±0.025)
Repeatability c
Sequential switching
Random switching
c. Repeatability measured after four (4) hours warm-up and with a one (1) second pause between
movements.
±0.008 dB (±0.005)
±0.025 dB (±0.01)
Optical Return Lossd
Single-mode
Multimode
d. Excludes external pigtail backscatter and connector reflections.
58 dB (62 dB)
20 dB (25 dB)
Polarization Dependent Losse
e. Polarization dependent loss only applies to single-mode switches and is measured at 1550 nm.
0.05 dB (0.02 dB)
Isolation –80 dB (–100 dB)
Typical Switching Life 10 million cycles, minimum
Switching Time
Between adjacent channels
Each additional channel
330 msec
50 msec
(空格分隔,最多3個,單個標簽最多10個字符)
10
立即詢價
您提交后，專屬客服將第一時間為您服務