精品国产亚洲国产亚洲,久热中文在线观看精品视频,成人三级av黄色按摩,亚洲AV无码乱码国产麻豆

成都善榮機電設備有限公司
中級會員 | 第9年

17302157802

當前位置:成都善榮機電設備有限公司>>日本SMC>>SMC氣缸>> MHZ2-25D日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性

參  考  價面議
具體成交價以合同協議為準

產品型號MHZ2-25D

品       牌SMC/日本

廠商性質經銷商

所  在  地成都市

更新時間:2025-02-23 15:35:14瀏覽次數:2334次

聯系我時,請告知來自 化工儀器網
標準行程 -mm 電動機功率 -kW
動作方式 其他 缸徑 -mm
接管口徑 -mm 接管螺紋 -
理論作用力 -N 氣缸數 -
適用壓力 - 速度范圍 -
外形尺寸 -mm 溫度范圍 -
重量 -kg,-kg 重量 -kg,-kg
最大負荷 -N 最大力距 -Nm
最大行程 -mm
日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性
適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
氣源切斷時落下防止用的鎖緊氣缸內置,帶導桿的薄型氣缸。(單向鎖緊)
把制動機構緊湊內置在滑臺內。
能進行中間停止
 Construct so that the human body will not come into direct contact with driven objects or

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性


適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
氣源切斷時落下防止用的鎖緊氣缸內置,帶導桿的薄型氣缸。(單向鎖緊)
把制動機構緊湊內置在滑臺內。
能進行中間停止
 Construct so that the human body will not come into direct contact with driven objects or the moving parts of locking cylinders.   
If there is a risk of contact, provide safety measures such as a cover or a system that uses sensors that will activate an emergency stop before contact is made.
2. Use a balance circuit in which lurching of the piston is taken into consideration.
but only after a time lag. This lag determines the amount of the overrun of the piston stroke.
there are constraints in terms of the allowable kinetic energy that can be applied to the cylinder in a locked state.
Therefore, refer to the allowable kinetic energy of the respective series. Furthermore, during locking,
the mechanism must sustain the thrust of the cylinder itself, in addition to absorbing the kinetic energy.
 Therefore, even within a given allowable kinetic energy level, there is an upper limit to the amount of the load that can be sustained.
• Fine lock series (Series CLJ2/CLM2/ CLG1) Maximum load at horizontal mounting:
Thus, the range of the maximum and minimum amounts of the overrun is the stopping precision.
• Place the limit switch before the desired stopping position, only in the amount of the overrun.
• The limit switch must have a detection length (dog length) of the overrun amount + α.
• For SMC’s auto switches, the operating range are between 8 and 14 mm. (It varies depending on a switch model.)
When the overrun amount exceeds this range, self-holding of the contact should be performed at the switch load side.
∗  For stopping accuracy, refer to Series CLJ (P. 603), Series CLM2 (P. 614), Series CLG1 (P. 627), and Series CL1 (P. 637) respectively.
內置鎖機構的氣缸與導桿緊湊的體化,直線移動單元。(雙向鎖緊)
70% or less of the holding force (Maximum static load) for spring lock Maximum load at vertical mounting: 35% or less of the holding force
 (Maximum static load) for spring lock • Lock-up series (Series CL1) Maximum load at horizontal mounting: 50% or less of the holding force
(Maximum static load) Maximum load at vertical mounting: 25% or less of the holding force (Maximum static load) 3.In a locked state, do not apply impacts,
strong vibrations or rotational forces.   
Do not apply a impacts, strong vibrations or rotational forces from external sources,
because this could damage or shorten the life of the lock unit. 4.The locking of the fine lock cylinder is directional.    

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性
Although the fine lock cylinder can be locked in both directions, be aware that its holding force is smaller in one of the directions.   
帶磁性開關(CDLQ系列:CDLQ)
氣源切斷時落下防止用的鎖緊氣缸。
氣緩沖結構和鎖緊單元內置于薄型氣缸中。(單向鎖緊)
帶磁性開關(RDLQ系列:RDLQ)
If the lock is applied at a desired position of a stroke and compressed air is applied to only one side of the cylinder,
the piston will lurch at a high speed the moment the lock is disengaged. In such a situation, there is a risk of injury to humans,
or equipment damage. To prevent the piston from lurching, use a balance circuit such as the recommended pneumatic circuit (P. 598).
 If an air-hydro fine lock cylinder is used, make sure to operate the lock portion through air pressure.
 Never use oil on the lock-up cylinder because the lock-up cylinder is a non-lube style. Failure to observe this could cause the lock to malfunction.
Refer to the following criteria for the maximum load in the locked state, and set.
帶磁性開關(CDNG系列:CDNG)
適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
帶磁性開關(CDLS系列:CDLS)
氣源切斷時落下防止用的鎖緊氣缸。(單向鎖緊)
the maximum load must be set as described below. 1. For constant static loads, such as for drop prevention:
• Fine lock series (Series CLJ2/CLM2/ CLG1) 35% or less of the holding force (maximum static load) Note)
For applications such as drop prevention, consider situations in which the air source is shut off,
 and make selections based on the holding force of the spring locked state. Do not use the pneumatic lock for drop prevention purposes.
 • Lock-up series (Series CL1) 50% or less of the holding force (maximum static load)
2. When kinetic energy acts upon the cylinder, such as when effecting an intermediate stop,
適合中間停止、急停、落下防止用的鎖緊氣缸。(雙向鎖緊)
帶磁性開關(CDL□系列:CDLJ2、CDLM2、CDLG1、CDL1)
When a cylinder is in a no-load and locked state, the holding force (maximum static load) is the lock’s ability to hold a static load
that does not involve vibrations or shocks. To ensure braking force, 
CLJ2/CLM2/CLG1···· Holding force at piston rod extended side decreases approx. 15%. 5.The locking of the lock-up cylinder is unidirectional.  
 Because the locking direction of the lock-up cylinder is unidirectional, select the locking direction in accordance with the particular operating conditions. I
t is also possible to manufacture a bidirectional lock-up cylinder. For details, refer to “Made to Order” on page 1989. Due to the nature of its construction,
 a lock-up cylinder has a play of approximay 0.5 mm to 1 mm in the axial direction. Therefore,
if an external stopper is used to stop the piston rod and the lock is engaged, the piston rod will shift in the amount of its axial play.
6.To effect an intermediate stop, take the cylinder’s stopping precision and overrun amount into consideration.   
Because the lock is applied by mechanical means, the piston will not stop immediay in response to a stopping signal,

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

X
該信息已收藏!
標簽:
保存成功

(空格分隔,最多3個,單個標簽最多10個字符)

常用:

提示

X
您的留言已提交成功!我們將在第一時間回復您~
撥打電話
在線留言
欧美成人精品巨臀大屁股-亚洲综合欧美日韩一区| 国产传媒中文字幕在线观看-午夜福利视频在线播放观看| 国产日韩电影一区二区三区-美女露双奶头无遮挡物| 日本韩国亚洲欧美三级-日本东京不卡网一区二区三区| 一区二区三区国产高清mm-美女张开腿让帅哥桶爽| 欧美精品啪啪人妻一区二区-嫩草人妻舔舔羞羞一区二区三区| 久久久噜噜噜久久狠狠50岁-精品一区二区三区av| 免费午夜福利在线观看-黄色日本黄色日本韩国黄色| 国产福利视频一区二区三区-日韩人妻中文视频精品| 小12萝自慰喷水亚洲网站-chinese偷拍一区二区三区| 91蜜桃传媒一二三区-日韩欧美国产一区呦呦| 国产欧美日本不卡精美视频-日本后入视频在线观看| 国产精品中出久久久蜜臀-久久久中国精品视频久久久| 亚洲国产中文欧美一区二区三区-国产精品一区二区视频成人| 亚洲黑人欧美一区二区三区-亚洲一区二区三区免费视频播放| 黄色美女网站大全中文字幕-欧美韩国日本一区二区| 美女把腿张开给帅哥桶-无码无套少妇18p在线直播| 久色高清精品在线国产-国产精品视频一区三区四区| 国产精品美女在线网址-久草免费福利在线观看视频| 日本少妇激情一区二区-亚洲自偷自拍熟女另类蜜臀| 久久精品亚洲无中文东京热-日本妹子内谢视频一区| 午夜福利院免费在线观看-久久精品日产第一区二区三区画质| 婷婷六月视频在线观看-久久亚洲综合国产精品| 国产欧美日本一区二区-一区二区三区亚洲在线播放| 黄色av网站在线免费观看-亚洲欧美精品偷拍tv| 国产一区二区三区四区五区麻豆-欧美一级在线视频播放| 欧美精品一区二区三区爽爽爽-日韩国产精品亚洲经典| 日韩高清在线观看一区二区-美产av在线免费观看| 一区二区三区女同性恋-熟妇高潮一区二区高清网络视频| 国产免费高清av在线播放-成年人在线播放中文字幕| 国内精产熟女自线一二三区-六月丁香婷婷在线观看| 亚洲综合av一区二区三区-高潮又爽又黄无遮挡激情视频| 国产精品一区二区欧美视频-国产一区二区三区天码| 亚洲精品蜜桃在线观看-国产欧美日韩在线观看精品观看| 99热在线精品免费6-av一区二区在线观看| 天天干天天日天天射天天舔-精品香蕉视频官网在线观看| 中文字幕人妻少妇第一页-隔壁的女孩在线看中文字幕| 日韩av电影一区二区网址-老熟妇仑乱视频一区二| 日韩av电影一区二区网址-老熟妇仑乱视频一区二| 国内精产熟女自线一二三区-六月丁香婷婷在线观看| 国产欧美日本一区二区-一区二区三区亚洲在线播放|