化工儀器網
技術文章
測試儀Mach-1應用：壓痕小鼠股骨軟骨剛度和顳下頜關節下頜軟骨改變
閱讀：460 發布時間：2021-3-18Biomomentum多軸機械測試儀Mach-1應用：
Automated Indentation Demonstrates Structural Stiffness of Femoral Articular Cartilage and Temporomandibular Joint Mandibular Condylar Cartilage Is Altered in FgF2KO Mice
Paige S. Woods, Alyssa A. Morin, Po-Jung Chen, Sarah Mahonski, Liping Xiao, Marja Hurley, Sumit Yadav, and Tannin A. Schmidt
CARTILAGE. October 2020. doi:10.1177/1947603520962565
Objective
Employ an automated indentation technique, using a commercially available machine, to assess the effect of fibroblast growth factor 2 (FGF2) expression on structural stiffness over the surface of both murine femoral articular cartilage (AC) and temporomandibular joint (TMJ) mandibular condylar cartilage (MCC).
Design
Experiments were performed using 3-month-old female homozygote Fgf2KO mice with wild type (WT) littermates. After euthanization, isolated mandibles and hindlimbs were either processed for histology or subjected to automated indentation on a Biomomentum Mach-1 v500csst with a 3-axis motion controller in a phosphate buffered saline bath using a 0.3 mm spherical tip indenter. The effect of indentation depth on normal force was characterized, then structural stiffness was calculated and mapped at multiple positions on the AC and MCC.
Results
Automated indentation of the AC and TMJ MCC was successfully completed and was able to demonstrate both regional variation in structural stiffness and differences between WT and Fgf2KO mice. Structural stiffness values for Fgf2KO AC were significantly smaller than WT at both the medial/anterior (P < 0.05) and medial/posterior (P < 0.05) positions. Global Fgf2KO also lead to a decrease in MCC thickness of the TMJ compared with WT (P < 0.05) and increased structural stiffness values for Fgf2KO at both the posterior and anterior location (P < 0.05).
Conclusions
Biomomentum多軸機械測試儀Mach-1應用：自動壓痕表明FgF2KO小鼠股骨軟骨的結構剛度和顳下頜關節下頜Con突軟骨發生改變。
采用自動壓痕技術，使用市售機器評估成纖維細胞生長因子2（FGF2）表達對鼠股骨關節軟骨（AC）和顳下頜關節（TMJ）下頜con突軟骨表面的結構剛度的影響（我的客戶中心（MCC）。設計使用具有野生型（WT）同窩仔的3個月大的雌性純合子Fgf2KO小鼠進行實驗。對分離出的下頜骨和后肢進行組織學處理，或在帶有3-軸運動控制器的Biomomentum Mach-1 v500csst上使用0.3毫米球形尖壓頭在磷酸鹽緩沖鹽水浴中進行自動壓痕。表征了壓痕深度對法向力的影響，然后計算結構剛度并將其映射到AC和MCC的多個位置。結果AC和TMJ MCC的自動壓痕已成功完成，并且能夠證明結構剛度的區域差異以及WT和Fgf2KO小鼠之間的差異。Fgf2KO AC的結構剛度值在內側/前側（P <0.05）和內側/后側（P <0.05）位置均顯著小于WT。與WT相比，整體Fgf2KO還會導致TMJ的MCC厚度減?。≒ <0.05），并且在后部和前部位置的Fgf2KO的結構剛度值都會增加（P <0.05）。