應用領域	建材,電子,交通,電氣	類型	手持式數顯
精度	0.1mpa

SCALP-05便攜式智能玻璃應力分析儀可以測量半鋼化和鋼化平板玻璃、光伏玻璃、汽車玻璃厚度方向上的內部殘余應力、結構 應力和安裝后的機械載荷應力分布，以及壓應力和張應力厚度方向定量數值分布。

技術指標：

型號	SCALP-05
測量厚度范圍	1~5mm
測量表面壓力范圍	>1.0Mpa
測量精度	<1MPa （表面應力<4MPa）
<5%（其他情況）
可測量玻璃	平面和曲面玻璃（r>300mm）
可測量表面	空氣面、錫面、壓花
激光波長	635nm
激光輸出功率	5mW
PC配置要求	Windows Vista?7?8及以上NET Framework 4.5
PC接口	USB2.0
操作溫度	10~50℃
操作濕度	0~90%相對濕度（無冷凝）
限制條件	不能直接測量Low-E膜面a減反射膜面、絲網印面測量時陽光避免直射
外形尺寸	56mmx27.5mmx76mm
重量	<250g

SCALP-05 is a compact scattered light polariscope for depthwise stress measurement in sheet glass. SCALP-05 contains diode laser, optics and camera. Recording of the data and stress calculation is done by PC, connected over USB. Handling of the polariscope is simple – clean the glass, apply a drop of immersion liquid, place SCALP onto the same spot and click the start button in software. After 3 seconds the stress profile is shown on the screen of PC.

Dimensions (L*W*H): 56*28*76 mm
Weight: 177 g
Communication interface: USB 2.0
Power supply: USB bus
Power consumption: 1.0 W
Laser wavelength: 635 nm
Laser output power:<5 mW
Sensor resolution: 1280*1024 pixels
Software requirements: Windows 10, .NT 4.6
Measurable glass: Flat and curved glass (r > 300 mm)
Measurable surface: Air and tin side
Minimum measurable thickness:<1 mm
Maximum measurable depth: 6 mm (on glass with any thickness)
Measurement time: 1-6 seconds, default 3 seconds
Minimum surface stress: 1 MPa
Maximum stress: Not limited
Precision:<1 MPa if surface stress < 4 MPa, <5% otherwise
Operating conditions: +10 … +50 °C (with some thermal isolation down to -10 °C)
Humidity: 0 – 90 % R.H. (non-condensing)
Ambient light: Direct sunlight must be avoided
Calibration: Calibrated by manufacturer
Warranty: 2 years
Limitations: some coatings (low-E, reflective, etc.), covered or painted surfaces, surfaces with texture